Bluetooth Setup; Add A Cell Phone - AT&T DL72130 Complete User's Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone or headset with your telephone, you
must first pair and connect your Bluetooth cellular phone or headset with the
telephone base. Then, the DL72130/DL72210/DL72240/DL72250/DL72310/
DL72340/DL72350/DL72510/DL72570/DL72580 can be used to make or
answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 15 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user's manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
1. Choose a slot to pair the cell phone.
Press and hold CELL 1 or CELL 2 on the
telephone base for about four seconds
until the CELL 1 or CELL 2 light flashes.
If there is already a cell phone in the
f
slot, the existing cell phone will be
erased from cell devices list.
2. Turn on the Bluetooth feature of your cell phone and search for or add new
devices. Once your cell phone finds your AT&T phone (AT&T DECT 6.0), press
the appropriate key on your cell phone to continue the pairing process.
All cell phones that are connected to the telephone base are disconnected
f
temporarily until the pairing process is complete.
When a device is successfully paired and connected, the corresponding status
1
icon ( or ) displays. The corresponding device light on the telephone base
2
(CELL 1 or CELL 2) turns on.
19
HANDSET 1
ECO
1
2
10:30 11/20
PM