Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below.
The telephone base is ready for tabletop use. If you want to change to
wall-mounting, see Installation options on page 13 for details.
Telephone base installation
Plug the large end of the
telephone base power adapter
into a power outlet not
controlled by a wall switch.
Route the power
adapter cord
through this slot.
Plug the small end of the
telephone base power adapter
into the power adapter jack on
the back of the telephone base.
Plug one end of the
telephone line cord into a
telephone jack or a DSL filter.
Plug the other end of the telephone
line cord into the telephone jack on
the back of the telephone base.
Raise the antenna.
8
If you have DSL
high-speed
Internet service,
a DSL filter (not
included) is
required.
Route the
telephone line cord
through this slot.