Table of Contents
Advertisement
4. If you are instructed to return the lower bezel, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Replacing the lower bezel
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x).
To install the lower bezel on the 5U server model with hot-swap power supplies (Model name: 2582-F4x),
complete the following steps.
1. Insert the two bottom tabs on the lower bezel into the corresponding holes in the front of the chassis.
2. Rotate the top of the lower bezel up to the chassis; then, press the blue-colored release tab on the right
side of the lower bezel and completely close the lower bezel until it locks securely into place.
.
Chapter 6
Removing and replacing components
151
Advertisement
Table of Contents
Troubleshooting
