Connecting The Cables - Lenovo System x3100 M4 Installation And Service Manual

Cover-release
latch
Key lock
4. Lock the side cover.
5. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the
server.

Connecting the cables

Use this information to connect the cables.
Attention: To prevent damage to equipment, connect the power cords last.
If the server cables and connector panel have color-coded connections, match the color of the cable end
with the color of the connector. For example, match a blue cable end with a blue panel connector, a red
cable end with a red connector, and so on.
The following illustration shows the input/output (I/O) connectors on the rear of the rear of server models with
non-hot-swap power supplies (4U chassis).
System x3100 M4 Installation and Service Guide
74