Using The Serverguide Setup And Installation - Lenovo System x3100 M4 Installation And Service Manual

restart the server to run the Setup utility. For more information about using this program, see
Settings Utility program" on page
• Configuring RAID arrays
For information about configuring RAID arrays, see
The following table lists the different server configurations and the applications that are available for
configuring and managing RAID arrays.
Table 12. Server configuration and applications for configuring and managing RAID arrays
Server configuration
ServeRAID-M1115 adapter
ServeRAID-M5110 adapter
ServeRAID-M5120 adapter
Notes:
1. For more information about the Human Interface Infrastructure (HII) and SAS2IRCU, go to
www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5088601
2. For more information about the MegaRAID, go to
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5073015
Using the ServerGuide Setup and Installation CD
Use this information as an overview for using the ServerGuide Setup and Installation CD.
The ServerGuide Setup and Installation CD provides software setup tools and installation tools that are
designed for your server. The ServerGuide program detects the server model and optional hardware devices
that are installed and uses that information during setup to configure the hardware. The ServerGuide
simplifies the operating-system installations by providing updated device drivers and, in some cases,
installing them automatically.
You can download a free image of the ServerGuide Setup and Installation CD from
support/entry/portal/ docdisplay?lndocid=SERV-GUIDE
In addition to the ServerGuide Setup and Installation CD, you must have your operating-system CD to install
the operating system.
ServerGuide features
This information provides an overview of the ServerGuide features.
Features and functions can vary slightly with different versions of the ServerGuide program. To learn more
about the version that you have, start the ServerGuide Setup and Installation CD and view the online
overview. Not all features are supported on all server models.
92.
"Configuring RAID arrays" on page
RAID array configuration (before
operating system is installed)
MegaRAID BIOS Configuration
Utility (press Ctrl+H to start), pre-
boot CLI (press Ctrl+P to start),
ServerGuide, HII
MegaRAID BIOS Configuration
Utility (press Ctrl+H to start), pre-
boot CLI (press Ctrl+P to start),
ServerGuide, HII
MegaRAID BIOS Configuration
Utility (press Ctrl+H to start), pre-
boot CLI (press Ctrl+P to start),
ServerGuide, HII
.
RAID array management (after
operating system is installed)
MegaRAID Storage Manager (MSM),
MegaCLI (Command Line Interface),
and IBM Director
MegaRAID Storage Manager (MSM),
MegaCLI, and IBM Director
MegaRAID Storage Manager (MSM),
MegaCLI, and IBM Director
.
.
http://www.ibm.com/
.
Chapter 3 Configuration information and instructions
"Advanced
91.
http://
79