Replacing The Ink Cartridge - Pitney Bowes SendPro C Auto Operator's Manual

Quick start guide
4. Unscrew the moistener bottle cap and fill it with Pitney Bowes E-Z Seal®. Do not overfill the
moistener bottle.
5. Screw the cap back on and place the bottle back in its original site (upside down in the device).
6. Close the feeder access cover.
7. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely wet.

Replacing the ink cartridge

Replace the ink cartridge when the low ink warning appears. This ensures your device is in optimal
working condition.
1. Tap Settings.
2. Scroll down and tap Envelope Printer Maintenance.
3. Tap Install Ink.
Pitney Bowes Operator Guide April 2022 41