Filling The Moistener Tank - Pitney Bowes SendPro C Auto Quick Start Manual

3. Make sure that the seal/no seal lever is set to the seal position (all the way to the left).
4. Place the envelopes on the feed deck. Tap Start on the Envelope Printing or Print on Envelopes
screen.
If the moistener tank is full and your envelopes do not seal correctly, clean or replace the moistener
brush and wick.

Filling the moistener tank

Your device will need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill the
moistener tank.
Pitney Bowes Quick Start Guide April 2022 27