Planet GS-4210-24T4S User Manual page 67

•
IPv6 Address
•
Gateway
• DHCPv6 Client
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• Auto Configuration
• IPv6 In Use Address
• IPv6 In Use Gateway
• IPv6 Static Address
• IPv6 Static Gateway
• DHCPv6 Client
a router solicitation for a few seconds; the total time needed to complete
auto-configuration can be significantly longer.
Provide the IPv6 address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also uses the following legally IPv4 address. For example, ':192.1.2.34'.
Provide the IPv6 Prefix of this switch. The allowed range is 1 through 128.
Provide the IPv6 gateway address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'.
To enable this Managed Switch to accept a configuration from a Dynamic Host
Configuration Protocol version 6 (DHCPv6) server. By default, the Managed
Switch does not perform DHCPv6 client actions. DHCPv6 clients request the
delegation of long-lived prefixes that they can push to individual local hosts.
Figure 4-2-5: IPv6 Information Page Screenshot
Description
Display the current auto configuration state.
Display the current IPv6 in-use address.
Display the current in-use gateway.
Display the current IPv6 static address.
Display the current IPv6 static gateway.
Display the current DHCPv6 client status.
67
User's Manual of GS-4210 Series