Table of Contents
Advertisement
• Server Priority
• Dead Time
• Usage Type
Buttons
: Click to add Radius server setting.
The page includes the following fields:
Object
• IP Address
• Auth Port
• Acct Port
• Key
• Timeout
• Retries
• Priority
• Dead Time
• Usage Type
• Modify
Set the server priority
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
Set the usage type. The following modes are available:
Login
802.1X
All
Figure 4-5-19: Login Authentication List Page Screenshot
Description
Display the current IP address.
Display the current auth port.
Display the current acct port.
Display the current key.
Display the current timeout.
Displays the current retry times.
Display the current priority.
Display the current dead time.
Display the current usage type.
Click
to edit login authentication list parameter.
Click
to delete login authentication list entry.
User's Manual of GS-4210 Series
270
Advertisement
Table of Contents
