Planet GS-4210-24T4S User Manual page 320

The page includes the following fields:
Object
• ACL Name
• Sequence
• Action
• Protocol
• Source IP Address
• Source IP Address
Value
• Source IP Wildcard
Mask
• Destination IP Address
• Destination IP Address
Value
• Destination IP
Wildcard Mask
• Source Port
Description
Select ACL name for this drop down list.
Set the ACL sequence.
Indicates the forwarding action of the ACE.

Permit: Frames matching the ACE may be forwarded and learned.

Deny: Frames matching the ACE are dropped.

Shutdown: Port shutdown is disabled for the ACE..
Specify the protocol filter for this ACE.

Any(IP): No protocol filter is specified.

Select from list: If you want to filter a specific protocol with this ACE, choose
this value and select protocol for this drop down list.
Specify the Source IP address filter for this ACE.

Any: No source IP address filter is specified.

User Defined: If you want to filter a specific source IP address with this ACE,
choose this value. A field for entering a source IP address value appears.
When "User Defined" is selected for the source IP address filter, you can enter a
specific source IP address. The legal format is "xxx.xxx.xxx.xxx". A frame that
hits this ACE matches this source IP address value.
When "User Defined" is selected for the source IP filter, you can enter a specific
SIP mask in dotted decimal notation.
Specify the Destination IP address filter for this ACE.

Any: No destination IP address filter is specified.

User Defined: If you want to filter a specific destination IP address with this
ACE, choose this value. A field for entering a source IP address value
appears.
When "User Defined" is selected for the destination IP address filter, you can
enter a specific destination IP address. The legal format is "xxx.xxx.xxx.xxx". A
frame that hits this ACE matches this destination IP address value.
When "User Defined" is selected for the destination IP filter, you can enter a
specific DIP mask in dotted decimal notation.
Specify the source port for this ACE.

Any: No specifc source port is specified (source port status is "don't-care").

Single: If you want to filter a specific source port with this ACE, you can
enter a specific source port value. A field for entering a source port value
appears. The allowed range is 0 to 65535. A frame that hits this ACE
matches this source port value.

Range: If you want to filter a specific source port range filter with this ACE,
320
User's Manual of GS-4210 Series