Port Setting - Planet GS-4210-24T4S User Manual

4.5.3.3 802.1X Port Setting
This page allows you to configure the IEEE 802.1X Port Setting. The 802.1X Port Setting screens in
4-5-28 appear.
The page includes the following fields:
Object
• Port
• Mode
• Reauthentication
Enable
Figure 4-5-27: 802.1X Port Setting Page Screenshot
Description
Select port for this drop down list.
If NAS is globally enabled, this selection controls the port's authentication mode.
The following modes are available:

No Authentication

Authentication

Force Authorized
In this mode, the switch will send one EAPOL Success frame when the
port link comes up, and any client on the port will be allowed network
access without authentication.

Force Unauthorized
In this mode, the switch will send one EAPOL Failure frame when the
port link comes up, and any client on the port will be disallowed network
access.
If checked, successfully authenticated supplicants/clients are reauthenticated
after the interval specified by the Reauthentication Period. Reauthentication for
802.1X-enabled ports can be used to detect if a new device is plugged into a
switch port or if a supplicant is no longer attached.
278
User's Manual of GS-4210 Series
Figure 4-5-27 & Figure