Port Setting - Planet Networking & Communication WGS-4215-8P2S User Manual

4.9.12.2 Port Setting

Storm control for the switch is configured on this page. There are three types of storm rate control:
 Broadcast storm rate control
Unknown Unicast storm rate control

Unknown Multicast storm rate control

The configuration indicates the permitted packet rate for unknown unicast, unknown multicast, or broadcast traffic across the
switch. The Storm Control Configuration screens in
The page includes the following fields:
Object
 Port

Port State
 Action

Type Enable

Rate (kbps/pps)
Figure 4-9-70
Figure 4-9-70 Storm Control Setting Page Screenshot
Description
Select port from this drop-down list.
Enable or disable the storm control status for the given storm type.
Configures the action performed when storm control is over rate on a port. Valid
values are Shutdown or Drop.
The settings in a particular row apply to the frame type listed here:
 broadcast
 unknown unicast
 unknown multicast
Configure the rate for the storm control. The default value is "10,000".
273
User's Manual of WGS Managed Series
& Figure 4-9-71 appear.