Planet Networking & Communication WGS-4215-8P2S User Manual page 267

Buttons
: Click to apply changes.
The page includes the following fields:
Object
 Port Name
 Enable State
 L2 Entry Num
 Action
and reconnected on the port (by disconnecting the cable), the port will
remain shut down. There are three ways to re-open the port:
1) Disable and re-enable Limit Control on the port or the switch,
2) Click the Reopen button.

Discard: If Limit + 1 MAC addresses is seen on the port, it will trigger the
action that do not learn the new MAC and drop the package.
Figure 4-9-63 Port Security Status Page Screenshot
Description
The switch port number of the logical port
Display the current per port security status
Display the current L2 entry number
Display the current action
267
User's Manual of WGS Managed Series