Egress Queue - Planet Networking & Communication WGS-4215-8P2S User Manual

The page includes the following fields:
Object
 Port

Egress Rate Limit (Kbps)

4.8.4.3 Egress Queue

The Egress Queue Bandwidth Control Settings and Status screens in
The page includes the following fields:
Object
 Port
 Queue
 State

CIR (Kbps)
Buttons
: Click to apply changes.
Description
The switch port number of the logical port
Display the current egress rate limit
Figure 4-8-21 Egress Queue Bandwidth Settings Page Screenshot
Description
Select port number from this drop-down list
Select queue number from this drop-down list
Enable or disable the port rate policer. The default value is "Disabled".
Configure the CIR for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Figure 4-8-22 Egress Queue Status Page Screenshot
User's Manual of WGS Managed Series
Figure 4-8-21 & Figure 4-8-22
209
appear.