Planet Networking & Communication WGS-4215-8P2S User Manual page 95

The page includes the following fields:
Object
 Session ID
 Monitor Session State
 Destination Port
 Allow-ingress
 Sniffer TX Ports
 Sniffer RX Ports
Buttons
: Click to apply changes.
The page includes the following fields:
Object
 Session ID
 Destination Port
 Ingress State
 Source TX Port

Source RX Port
Description
Set the port mirror session ID.
Possible ID are: 1 to 4.
Enable or disable the port mirroring function.
Select the port to mirror destination port.
Frames from ports that have either source (rx) or destination (tx) mirroring enabled are
mirrored to this port.
Frames transmitted from these ports are mirrored to the mirroring port. Frames received
are not mirrored.
Frames received at these ports are mirrored to the mirroring port.
Frames transmitted are not mirrored.
Figure 4-3-10 Mirroring Status Page Screenshot
Description
Display the session ID
This is the mirroring port entry
Display the ingress state
Display the current TX ports
Display the current RX ports
95
User's Manual of WGS Managed Series