Planet Networking & Communication WGS-4215-8P2S User Manual page 303

 Port Select
 Optional TLV Select
Buttons
: Click to apply changes
Tx only
■
Rx only
■
TxRx
■
Disabled
■
Select port from this drop-down list
Configures the information included in the TLV field of advertised messages.

System Name: When checked the "System Name" is included in LLDP
information transmitted.

Port Description: When checked the "Port Description" is included in
LLDP information transmitted.

System Description: When checked the "System Description" is
included in LLDP information transmitted.

System Capability: When checked the "System Capability" is included
in LLDP information transmitted.

802.3 MAC-PHY: When checked the "802.3 MAC-PHY" is included in
LLDP information transmitted.

802.3 Link Aggregation: When checked the "802.3 Link Aggregation" is
included in LLDP information transmitted.

802.3 Maximum Frame Size: When checked the "802.3 Maximum
Frame Size" is included in LLDP information transmitted.

Management Address: When checked the "Management Address" is
included in LLDP information transmitted.

802.1 PVID: When checked the "802.1 PVID" is included in LLDP
information transmitted.
Figure 4-12-4 LLDP Port Status Page Screenshot
303
User's Manual of WGS Managed Series