Planet Networking & Communication WGS-4215-8P2S User Manual page 288

The page includes the following fields:
Object
 ACL Name
 Sequence
 Action
 Protocol
 Source IP Address
 Source IP Address
Value
 Source IP Prefix
Length
 Destination IP Address
 Destination IP Address
Value
 Destination IP Prefix
Length
 Source Port
Description
Select ACL name from this drop-down list
Set the ACL sequence
Indicates the forwarding action of the ACE

Permit: Frames matching the ACE may be forwarded and learned.

Deny: Frames matching the ACE are dropped.

Shutdown: Port shutdown is disabled for the ACE.
Specify the protocol filter for this ACE

Any (IP): No protocol filter is specified.

Select from list: If you want to filter a specific protocol with this ACE, choose
this value and select protocol from this drop-down list.
Specify the Source IP address filter for this ACE

Any: No source IP address filter is specified.

User Defined: If you want to filter a specific source IP address with this ACE,
choose this value. A field for entering a source IP address value appears.
When "User Defined" is selected for the source IP address filter, you can enter a
specific source IP address. The legal format is "xxxx:xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx:xxxx". A frame that hits this ACE matches this source IP address
value.
When "User Defined" is selected for the source IP filter, you can enter a specific
SIP prefix length in dotted decimal notation.
Specify the Destination IP address filter for this ACE.

Any: No destination IP address filter is specified.

User Defined: If you want to filter a specific destination IP address with this
ACE, choose this value. A field for entering a source IP address value
appears.
When "User Defined" is selected for the destination IP address filter, you can
enter a specific destination IP address. The legal format is " xxxx:xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx:xxxx ". A frame that hits this ACE matches this destination IP
address value.
When "User Defined" is selected for the destination IP filter, you can enter a
specific DIP prefix length in dotted decimal notation.
Specify the source port for this ACE.

Any: No specific source port is specified (source port status is "don't-care").

Single: If you want to filter a specific source port with this ACE, you can
enter a specific source port value. A field for entering a source port value
appears. The allowed range is 0 to 65535. A frame that hits this ACE
288
User's Manual of WGS Managed Series