Planet Networking & Communication WGS-4215-8P2S User Manual page 228

 Server Priority
 Dead Time
 Usage Type
Buttons
: Click to add Radius server setting.
The page includes the following fields:
Object
 IP Address
 Auth Port
 Acct Port
 Key
 Timeout
 Retries
 Priority
 Dead Time
 Usage Type
 Modify
Set the server priority
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
Set the usage type. The following modes are available:

Login

802.1X

All
Figure 4-9-12 Login Authentication List Page Screenshot
Description
Display the current IP address
Display the current auth port
Display the current acct port
Display the current key
Display the current timeout
Display the current retry times
Display the current priority
Display the current dead time
Display the current usage type
Click to edit login authentication list parameter.
Click to delete login authentication list entry.
228
User's Manual of WGS Managed Series