Planet Networking & Communication WGS-4215-8P2S User Manual page 59

The page includes the following fields:
Object

Mode

IP Address

Subnet Mask

Gateway

DNS Server 1/2
Buttons
: Click to apply changes.
Description
Indicates the IP address mode operation. Possible modes are:
Static: Enable NTP mode operation.
When enabling NTP mode operation, the agent forwards and transfers
NTP messages between the clients and the server when they are not on
the same subnet domain.
DHCP: Enable DHCP client mode operation.
Enable the DHCP client by checking this box. If DHCP fails and the
configured IP address is zero, DHCP will retry. If DHCP fails and the
configured IP address is non-zero, DHCP will stop and the configured IP
settings will be used. The DHCP client will announce the configured
System Name as hostname to provide DNS lookup.
Provide the IP address of this switch in dotted decimal notation.
Provide the subnet mask of this switch in dotted decimal notation.
Provide the IP address of the router in dotted decimal notation.
Provide the IP address of the DNS Server in dotted decimal notation.
Figure 4-2-3 IP Information Page Screenshot
59
User's Manual of WGS Managed Series