• Fix the boot to the boot holder with a new clamp.
NOTE:
Make sure that the boot is not twisted.
• Install the brake hose clamp and odometer cable guide. (Front
brake hose routing: "8-19, Cable routing :"8-16)
• Install the front wheel. ("6-5)
NOTE:
Before tightening the front axle nut and front axle pinch bolts,
move the front fork up and down four or five times.
SUSPENSION SETTING
After installing the front fork, adjust the rebound damping force
and compression damping force as follows.
Fully turn the damping force adjuster clockwise to the stiffest
position, and then turn it out to the standard setting position.
NOTE:
Make sure to check the 1st click position by last click sound when
turning in the adjuster.
% Standard setting position
Rebound damping force adjuster A:
Compression damping force adjuster B:
16 clicks out
13 clicks out
DR-Z400SK2 ('02-MODEL)
10-21