Clutch - Suzuki DR-Z400S 2001 Service Manual

3-38 ENGINE

CLUTCH

CLUTCH DRIVE PLATES
Measure the thickness of the clutch drive plates using vernier
calipers. If a clutch drive plate is not within the service limit, re-
place the clutch plates as a set.
09900-20101: Vernier calipers
Drive plate thickness (No.1 & No.2)
Service Limit: 2.62 mm (0.103 in)
Drive plate claw width (No.1 & No.2)
Service Limit: 13.2 mm (0.520 in)
CLUTCH DRIVEN PLATES
Measure each clutch driven plate for distortion using the thick-
ness gauge. If a clutch driven plate is not within the service limit,
replace the clutch plates as a set.
09900-20803: Thickness gauge
Driven plate distortion
Service Limit: 0.10 mm (0.004 in)
CLUTCH SPRING FREE LENGTH
Measure the free length of each clutch spring using vernier cali-
pers. If any spring is not within the service limit, replace all of the
springs with new ones.
09900-20101: Vernier calipers
Clutch spring free length
Service Limit: 49.9 mm (1.96 in)