Suzuki DR-Z400S 2001 Service Manual page 300

• Install the oil lock piece 1 into the inne tube.
• Insert the inner tube into the outer tube and install the oil seal
using the special tool.
$ 09940-52861: Front fork oil seal installer set
• Install the oil seal stopper ring and dust seal.
#
Make sure that the oil seal stopper ring is fitted securely.
DAMPER ROD BOLT
• Install the damper rod into the inner tube.
• Apply the THREAD LOCK SUPER "1342" (For USA) or "1322"
(For the other countries) to the damper rod bolt.
' 99000-32050: THREAD LOCK SUPER "1342" (USA)
( 99000-32110: THREAD LOCK SUPER "1322" (Others)
• Tighten the front fork damper rod bolt to the specified torque
using the special tool.
$ 09940-54821: Front fork inner rod holder
!Frant fork damper rod bolt: 80 N·m (8.0 kgf . m, 58.0 lb-ft)
#
Use a new O-ring to prevent oil leakage.
DR-Z400SK2 ('02-MODEL) 10-17