7-34
ELECTRICAL SYSTEM
BATTERY
REMOVAL
Remove the battery cover. (
Remove the battery holder.
Remove the battery.
NOTE:
Disconnect the - battery lead wire, first.
SPECIFICATIONS
Type designation
Capacity
SERVICING
Visually inspect the surface of the battery container. If any signs
of cracking or electrolyte leakage from the sides of the battery
have occurred, replace the battery with a new one. If the battery
terminals are found to be coated with rust or an acidic white
powdery substance, clean the battery terminals with sandpa-
per.
6-2)
GT7B-4
12 V, 23.4 kC (6.5 Ah)/10 HR