Tighten the brake hose union bolt to the specified torque.
Brake hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
Before remounting the rear wheel, push the brake caliper pis-
tons all the way into the caliper.
Bleed air from the system after remounting the rear
wheel. (
2-19 and 2-20)
BRAKE DISC INSPECTION
BRAKE DISC .............................................................
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
Remove the reservoir cover. (
Remove the reservoir mounting bolt.
Place a rag underneath the brake hose union bolt on the
master cylinder to catch any spilt brake fluid. Remove the brake
hose union bolt and disconnect the brake hose.
Immediately wipe off any brake fluid contacting any part
of the motorcycle. The brake fluid reacts chemically with
paint, plastics, rubber materials, etc., and will damage
them severely.
6-46
6-52)
CHASSIS
6-55