INSPECTION
REAR SPROCKET
Inspect the rear sprocket for wear and damage. If any damages
are found, replace the sprocket and drive chain as a set.
È Normal wear
É Excessive wear
WHEEL HUB DUST SEALS ........................................
WHEEL BEARINGS .......................................
REAR WHEEL ..............................................................
REAR AXLE .................................................................
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear wheel in the reverse order of
removal and disassembly. Pay special attention to the following
points:
WHEEL BEARINGS
Apply SUZUKI SUPER GREASE "A" to the left wheel bear-
ing.
For USA
99000-25030: SUZUKI SUPER GREASE "A"
For the other countries
99000-25010: SUZUKI SUPER GREASE "A"
Install the wheel bearings using the special tool.
09941-34513: Bearing installer set
First, install the right wheel bearing, and then install
the left wheel bearings. The sealed cover on the wheel
bearing must face out. (
6-6 and 6-7
6-25)
6-6
6-7
6-7
CHASSIS
6-27