Gearshift Cam And Fork - Suzuki DR-Z400S 2001 Service Manual

GEARSHIFT CAM AND FORK

1 Gearshift fork No.1
2 Gearshift fork No.2
3 Gearshift fork shaft
4 Bearing
5 Pin
6 Gearshift cam
7 Bearing
8 Gearshift fork No.3
9 Gearshift fork shaft
Install the gearshift forks into the gearshifting grooves in the
correct position and direction.
Install the gearshift fork shafts.
NOTE:
After the gearshift fork shaft and gearshift forks have been
fitted, make sure that the gears engage normally.
Set the transmission gears to the neutral position.
ENGINE 3-49