Table of Contents
Advertisement
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The detergent drawer has been
pushed in.
Press
.
1.
Press
Remote start.
2.
Press
.
3.
a Remote start appears and the
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Note: You can deactivate remote
start on the appliance or in the
Home Connect app.
Press
.
1.
Press
Remote start.
2.
a Remote start goes out.
16.7 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
17 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
17.1 Overview of the basic
settings
Basic setting
Programme End
Buttons and Info
Display Bright-
ness
Left-hand side
dispenser
Right-hand side
dispenser
Language
Basic settings en
Description
Set the volume of
the signal at the
end of the pro-
gramme.
The volume of
the audible sig-
nal emitted when
the buttons are
pressed.
Set the display
brightness.
Specify the dis-
penser content.
Set the basic
dosage.
Set the basic
dosage.
Select the lan-
guage.
43
Advertisement
Table of Contents
