Filling The Dispensers - Siemens XQG100 User Manual And Installation Instructions

en Intelligent dosing system
saved when the appliance is in
standby mode.
→ "Buttons", Page 27
¡ Pour detergent or fabric softener
into the compartment for manual
dosing.
→ "Adding detergent and care
product", Page 38
¡ Activate the intelligent dosing sys-
tem once the programme has
ended.
→ "Buttons", Page 27
Requirements
¡ The laundry is prepared.
→ "Preparing the laundry", Page 35
¡ The laundry is sorted.
¡ The laundry is placed in the appli-
ance.
→ "Loading laundry", Page 37
¡ The programme is set.
→ "Setting a programme", Page 36
¡ The intelligent dosing system is ac-
tivated.
Fill the dispensers.
1.
→ "Filling the dispensers",
Page 40
To replace the contents of the dis-
penser with another product, clean
the detergent drawer.
→ "Cleaning the detergent drawer",
Page 44
If required, adjust the contents of
2.
the dispenser → Page 41.
If required, adjust the basic
3.
dosage → Page 41.
If required, adjust the programme
4.
settings.
→ "Adjusting the programme set-
tings", Page 37
Start the programme.
5.
→ "Starting the programme",
Page 38
Remove the laundry.
6.
→ "Unloading the laundry",
Page 39
40
15.2 Filling the dispensers
If you want to use the intelligent dos-
ing system or if the appliance dis-
plays a notification during operation
of the appliance, fill the dispensers.
Note: Fill the dispensers only with
suitable detergent and care products
→ Page 36.
If you want to add more liquid deter-
gent or fabric softener in the dis-
penser, use the same product.
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product, clean
the detergent drawer beforehand.
→ "Cleaning the detergent drawer",
Page 44
If you want to use both dispensers
for liquid detergent, adjust the con-
tents of the dispensers → Page 41.
Pull out the detergent drawer.
1.
Open the dispenser cover.
2.