Table of Contents
Related Manuals for Siemens iQ300 WD14S4 Series
Summary of Contents for Siemens iQ300 WD14S4 Series
- Page 1 Washer dryer WD14S4.. User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
- Page 2 This combination of symbol and signal To meet the high quality demands word indicates a possibly dangerous required by Siemens, every washer dryer situation. Not heeding the warning can that leaves our factory is carefully cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Saving energy and detergent . -
Page 4: Intended Use
Intended use Emptying the detergent draw, Intended use cleaning the detergent drawer and its housing ....43 This appliance is intended for private Drain pump is blocked ..44 ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions Warning Installation Risk of poisoning! Warning Detergents and care products Risk of electric shock/fire/ may result in poisoning if material damage/damage to consumed. the appliance! If accidentally swallowed, seek If the appliance is not installed medical advice. Keep properly, this may lead to a detergents and care products dangerous situation. - Page 7 Safety instructions The mains plug must be Warning ■ freely accessible at all times. Risk of fire/material damage/ If this is not possible, in damage to the appliance! order to comply with the The use of extension cords or relevant safety regulations, a power strips may result in fire switch (all pole due to overheating or short...
- Page 8 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 9: Operation
Safety instructions Certain objects may ignite Operation ■ when drying is in progress, Warning or even cause the appliance Risk of explosions/fire! to catch fire or explode. Laundry that has come into Remove any lighters or contact with solvents, oil, wax, matches from pockets on wax remover, paint, grease or items of clothing. - Page 10 Safety instructions Warning Warning Risk of poisoning! Eye/skin irritation! Poisonous fumes may be given Detergent and care products off by cleaning agents that may spray out if the detergent contain solvents, e.g. cleaning drawer is opened while the solvent. appliance is in operation. Do not use cleaning agents that Rinse eyes/skin thoroughly if contain solvents.
-
Page 11: Cleaning/Maintenance
Safety instructions If you pour the wrong Repairs and any other work ■ ■ quantity of detergent or on the appliance must only cleaning agent into the be conducted by our appliance, this may result in customer service or by an material damage or damage electrician. -
Page 12: Environmental Protection
Environmental protection Warning Environmental Risk of injury/material protection damage/damage to the appliance! P ackaging/used appliance The use of spare parts and E n v i r o n m e n t a l p r o t e c t i o n accessories supplied by other Dispose of packaging in an environmentally-responsible... -
Page 13: Tips On Economical Use
Environmental protection Tips on economical use Unpacking the washing maschine Always fill the appliance with the ■ maximum amount of laundry for Warning each programme. Risk of poisoning! Wash normally soiled laundry ■ Packaging material (e.g. Films, without pretreating. Styrofoam) can be dangerous for For light and normal soiling in ■... -
Page 14: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation on a base or a wooden joist floor Warning Risk of injury! Caution! The appliance is very heavy. Damage to the appliance ■ Be careful when lifting/transporting The appliance may "wander" and tip/ the appliance. topple from the base when spinning. -
Page 16: Removing The Transport Locks
Positioning and connecting Removing the transport locks Unscrew and remove all four transport brace screws. Caution! Damage to the appliance The appliance is secured for ■ transportation using transport locks. If the transport locks are not removed, the appliance may become damaged when it is operated. -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Slide in installation For a slide in or build under Installation Connection on left side the appliance cover plate can be removed. The appliance must be built under or built in prior to connecting to the power supply. - Page 18 Positioning and connecting Do not use a used supply hose. Only – Model: AquaSecure ■ use the supply hose supplied or one that was purchased from an authorised specialist retailer. Do not bend, squash, modify or cut ■ through the water supply hose (otherwise its strength is no longer guaranteed).
-
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a siphon Warning ■ The connection point must be Risk of scalding! secured using a hose clamp with a When you are washing at high diameter of 24 - 40 mm (available temperatures, there is a risk of scalding from specialist dealers). -
Page 20: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Risk of death! Incorrect levelling may result in intense noise, vibrations and wandering. There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■... -
Page 21: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Drum Clean k programme the first supply hose. - Page 22 Positioning and connecting a) Clip the mains cable securely in the holders. b) Insert and tighten the screws. c) Clip the hoses securely in the holders. Before switching on the appliance again: Pour approx. 1 litre of water into Note: dispenser II, select the Spin/Drain programme and start.
-
Page 23: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 24: Control Panel
Getting to know the appliance Control panel On/Off button for switching the appliance on and off. Start/Reload button for starting, interrupting, (e.g. adding laundry) programme. Drying target and drying time setting.~ Page 36 Additional programme settings can be selected. Overview of all additional programme settings.~ Page 36 Programme default settings can be changed. -
Page 25: Display Panel
Getting to know the appliance Display panel Programme default settings Additional programme settings Display Setting Display Setting Description ‰ Drying — - 90° Temp.°C Temperature that a/»/ö can be set in °C 30 60 90 120 Time Dry — = cold Extra Rinse ô... -
Page 26: Laundry
Laundry Status indicators for the programme Laundry progress (programme sequence) P reparing laundry for washing L a u n d r y Protecting your laundry and appliance Caution! Damage to the appliance/textiles Foreign objects (e.g. coins, paper clips, needles, nails) may damage the washing or components of the appliance. -
Page 27: Preparing Laundry For Drying
Laundry Preparing laundry for drying Sorting laundry Sort your laundry according to the care To ensure an even drying result, Note: instructions and manufacturer's sort the laundry according to the: information on the care labels, Type of fabric ■ depending on: Care symbols which are indicated on ■... -
Page 28: Starching
Detergent Starching Detergent Laundry should not be treated Note: C orrect selection of detergent with fabric softener. D e t e r g e n t The care label is crucial to ensure Switch on the appliance. correct detergent selection, temperature Select the Rinse à... -
Page 29: Saving Energy And Detergent
Detergent Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. Saving Soiling/note Reduced temper- Light ature and deter- No visible dirt or stains. Cloth- gent quantity as ing has taken on some body per the recom- odour, e.g.: mended dosage... -
Page 30: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 31 Overview of programmes Programme/Type of laundry Options/Information Easy Care Ó‰ 4,0 kg/2,0 kg Textiles made of synthetic materials or blended fabrics. — - 60 °C 0 - 1200 rpm ô Extra Rinse, T Pre-treatment ‰ Dry è (»è, ö è , a è) possible Mix щ...
- Page 32 Overview of programmes Programme/Type of laundry Options/Information 0 Spin/Drain p 8 kg/- For spinning with a selectable spin speed and subsequent draining. If you have selected 2, it will run p Drain pro- 0 - 1400 rpm gramme, the water is only drained after rinse process, no spin cycle.
- Page 33 Overview of programmes Programme/Type of laundry Options/Information P Gentle Dry 3,0 kg Gentle dry programme for drying garments with lower tempera- ture-by selecting to achieve automatic cupboard dry result -by selecting to achieve automatic iron dry result-by selecting to achieve automativ light drying. - by selecting »...
-
Page 34: Drying Table
Overview of programmes Programme/Type of laundry Options/Information â Memory With memory you can save a selected programme with your favourite settings. To store: Switch on the appliance. Select a programme. If required, change the programme default settings and/or select programme additional settings. Touch and hold â(Memory) button for approx. -
Page 35: Programme Default Settings
Programme default settings ñ Finished in Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 1.0h (h = hour) Y ou can change the default settings for increments. P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 36: Additional Programme
Additional programme settings 0 Time Dry: Time can be used Additional programme according to practical needs. Drying timed is recommended to dry few settings clothes. The optional time is 30/60/90/ 120 minutes. The default spinning time You can find possible additional N ote: is 10 minutes. -
Page 37: G Speedperfect
Operating the appliance G speedPerfect Operating the Washing in a shorter time while appliance achieving a washing result that is consistent with the normal performance. P reparing the appliance O p e r a t i n g t h e a p p l i a n c e Touch G speedPerfect to activate or The appliance was tested before deactivate this additional programme... -
Page 38: Select Programme/Switch On The Appliance
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different Swich on the appliance by touching size distribute themselves better power On/Off button. during the spin cycle. Individual If you have activated the Note: items of washing may cause... - Page 39 Operating the appliance Filling the dispensers Measuring aid A* for liquid detergent Pull out the detergent drawer. *depending on the model Position the measuring aid A for Warning measuring the correct amount of Eye / skin irritation! liquid detergent: If the detergent drawer is opened a) Pull out the detergent drawer.
-
Page 40: Starting The Programme
Operating the appliance Starting the programme Adding/removing laundry Touch and hold A Start/Reload button After starting the programme (only for for 1~2 seconds, then release the washing), you can add or remove button. The programme starts and the laundry if necessary. appliance door is locked. -
Page 41: Cancel The Programme
Operating the appliance Cancel the programme Removing laundry/switching off the appliance For programmes washing at high temperatures: Open the door and remove the Swich off the appliance by touching laundry. power On/Off button. Turn off the water tap. Swich on the appliance by touching Not required for Aqua-Stop Note: power On/Off button... -
Page 42: Appliance Settings
Appliance settings Appliance settings Cleaning and maintenance Y ou can change the following settings. A p p l i a n c e s e t t i n g s Mute the buzzer: Warning C l e a n i n g a n d m a i n t e n a n c e Risk of death! Press and hold the Options button ■... -
Page 43: Drum
Cleaning and maintenance Drum Emptying the detergent draw, cleaning the detergent drawer Warning and its housing Risk of injury/material damage/ damage to the appliance! If the appliance contains detergent or Permanently washing at low fabric softener residues: temperatures and a lack of ventilation Pull out the detergent drawer. -
Page 44: Drain Pump Is Blocked
Cleaning and maintenance Fit the insert and lock it in place Open the service flap. (push the cylinder onto the guide pin). Take the drain hose out of the retainer. Push in the detergent drawer. Remove the sealing cap and pour the water out into a suitable container. -
Page 45: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Refit and screw on the pump cover. is blocked Turn the programme selector to Off. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. Clean the drain hose and siphon connecting piece. -
Page 46: Faults And What To Do About Them
Faults and what to do about them Clean the filters: Faults and what to do Disconnect the hose from the rear of about them the appliance. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. - Page 47 Faults and what to do about them Drain the water. ~ Page 44 Pull the emergency release downwards with a tool and release. The door can then be opened.
-
Page 48: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy E:30 Door is not closed properly. Close the door and restart. Lights up (no water supply): Water tap turned on? Filter in the water supply is E:10r ■... - Page 49 Faults and what to do about them Faults Cause/Remedy The appliance is not filling Programme does not start? ■ with water. Is the tap turned on? ■ Could the filter in the water supply be blocked? Detergent is not being dis- ■...
- Page 50 Faults and what to do about them Faults Cause/Remedy Repeated, intensive foam- Have you used too much detergent? Add less detergent in the next time you ing. run a wash cycle with the same load. Detergent/fabric softener There is too much detergent/fabric softener in the dispensers. Do not fill the drips off the seal and col- dispensers above the max.
- Page 51 Faults and what to do about them Faults Cause/Remedy Water inlet noise during The washer dryer uses water condensation technology, water is constantly the drying phase. needed to dry the laundry. Therefore the water tap must be on all the time, till the end of the drying phase.
-
Page 52: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 46), please contact our after- sales service. -
Page 53: Consumption Values
Consumption values Consumption values R ecommended wash mode for normally soiled clothes at rated load capacity used C o n s u m p t i o n v a l u e s for the evaluation of the captioned model under the Efficiency Labelling Scheme (MWELS) is Cottons Eco t 60°C (spin speed 1400 rpm). -
Page 54: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 850 mm x 595 mm x 470 mm In addition to warranty claims against (height x width x depth) - Page 56 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.hk Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001665582* 9001665582 (0108)