Connecting The Appliance - Siemens XQG100 User Manual And Installation Instructions

Remove the power cable from the
3.
holder.
Remove the 4 sleeves.
4.
Put on the 4 cover caps.
5.
Installation and connection en
Push the 4 cover caps downwards.
6.
Note: To install the transport locks to
transport the appliance, perform
these steps again in the reverse or-
der.
4.6 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
15