Detergents And Care; Products; Basic Operation; Switching On The Appliance - Siemens XQG100 User Manual And Installation Instructions

en Detergents and care products
12 Detergents and care

products

The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ When using liquid detergents, only
use liquid detergents that are self-
flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ do not use products containing
solvents, caustic agents or volatile
substances
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
¡ Do not pour vinegar into the dis-
pensers → Page 40 of the intelli-
gent dosing system
operation
13 Basic operation
operation
13.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press ⁠ .
▶
36
The switch-on process takes a few
seconds.
a After a few seconds, the appliance
displays the start animation and
the programme overview.
a An audible function test is carried
out.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Requirement: The display shows the
programme menu.
→ "Programme menu", Page 22
Search through the menu.
1.
→ "Searching through the menu",
Page 20
Press the required programme.
2.
→ "Programmes", Page 29
a The display shows the programme
settings.
If required, adjust the programme
3.
settings.
→ "Adjusting the programme set-
tings", Page 37
Setting additional programmes
Requirement: The display shows the
programme menu.
→ "Programme menu", Page 22
Search through the menu until the
1.
display shows: More Programs .
→ "Searching through the menu",
Page 20
Press More Programs .
2.
Search through the menu.
3.
→ "Searching through the menu",
Page 20
Press the required programme.
4.
→ "Programmes", Page 29
a The display shows the programme
settings.