YASKAWA Powerlink A1000 Series Installation Manual page 5

For the drive setup, refer to one of the documentation listed below.
 Terms
Note: Indicates supplemental information that YASKAWA highly recommends be
followed. Content identified by Note: is not related to personnel safety or
equipment damage safety messages.
Powerlink Option: YASKAWA AC Drive SI-EL3 Powerlink option card
Standard for CANopen over Ethernet according to the Ethernet POWERLINK Standardization
Powerlink:
Group
EPL: Ethernet Powerlink
Host: YASKAWA inverter 1000 series
LED: Light Emitting Diode
OPT, Option: The unit described in this document
FCS: Frame Check Sequence
INVR: Inverter register number
EPSG: Ethernet Powerlink Standardization Group
NMT: Network management
MN: Powerlink managing node
CN: Powerlink controlled node
RFG: Ramp function generator
 Registered Trademarks
• Company names and product names listed in this manual are registered trademarks of
those companies.
YASKAWA Europe YEU TOEP C710616 87A - A1000 Option Powerlink - Installation Manual
YASKAWA Drive
Refer to the manual of the drive this option card is being used with.
The instruction manual for the drive covers basic installation, wiring, operation
procedures, functions, troubleshooting, and maintenance information.
It also includes important information on parameter settings and how to tune the drive.
A Quick Start Guide is included with the drive. For the more detailed technical
manual, visit YASKAWA's home page.
Europe: http://www.yaskawa.eu.com
Other areas: contact a YASKAWA representative
1 Preface and Safety
EN 5