YASKAWA Powerlink A1000 Series Installation Manual page 15

Figure E.3
1
2
3
4
1 – Connector CN5-C
2 – Connector CN5-B
3 – Connector CN5-A
4 – Drive grounding terminal (FE)
5 – Insert connector CN5 here
6 – Option card
3. Prepare RJ45 network cable connectors.
In the drives CIMR-A2A0004 to 0040 and 4A0002 to 0023 the network cable
must be routed to the outside through the drive top cover. Use a pair of diagonal
cutters to cut out the perforated openings at the left side of the top cover. Make
sure no sharp edges that can damage the cable remain.
Drives 2A0056 and above, and 4A0031 and above have enough space to keep all
wiring inside the unit.
YASKAWA Europe YEU TOEP C710616 87A - A1000 Option Powerlink - Installation Manual
5
6
7
8
Installing the Option Card
5 Installation Procedure
10
11
7 – Ground wire
8 – Use with cutters to create an
opening for cable lines
9 – Operator
10 – LED label
11 – Front cover
9
L/A 1 S/E
L/A 2 MS
EN 15