YASKAWA Powerlink A1000 Series Installation Manual page 11

 Communication Connector
The Powerlink Option is connected to the network using a RJ45 connector. The pin
assignment is explained in
Powerlink Connector
 Powerlink Option Status LEDs
The Powerlink Option has four LEDs that indicate the communication status. The
indications conform with DS301 and DS303: Indicator Specification.
 LEDs L/A 1 and L/A 2: Ethernet Link/Activity 1 and 2
The Link/Activity indicators show the status of the physical link and show activity on the
link period
 S/E LED
A green lit Powerlink S/E LED indicates the status of the Powerlink network state machine.
A red lit Powerlink S/E LED indicates error on the EPL network side.
 MS LED
The red Powerlink MS LED indicates the presence of any errors.
YASKAWA Europe YEU TOEP C710616 87A - A1000 Option Powerlink - Installation Manual
Table E.4.
Table E.4 Communication connector (RJ45)
Pin Signal
1
2
3
4
5
6
7
8
Housing
4 Powerlink Option Components
TD+
Send data
TD-
RD+ Receive data
– N.C. (Pins denoted as N.C. do not connect to any signal)
– N.C. (Pins denoted as N.C. do not connect to any signal)
RD- Receive data
– N.C. (Pins denoted as N.C. do not connect to any signal)
– N.C. (Pins denoted as N.C. do not connect to any signal)
– Shield
Description
EN 11