Rs-232 Panel; Firmware Panel - Extron electronics ISS 608 User Manual

RS-232 Panel

The view-only RS-232 panel (see figure 41,
protocol for the ISS 612 serial port.
The defaults are:
Baud rate — 9600
•
• Parity bit — None
These variables can be changed via SIS
commands (see
on page 57).

Firmware Panel

The Firmware panel (
updated. Update the firmware on the ISS from this panel (see
Installation
To update firmware:
In the Firmware panel, click the SELECT
1.
FILE button.
2. In the Open dialog box, browse to
locate the new firmware file on your
computer (by default the file is stored at
C:\Program Files (x86)\Extron\
Firmware\ISS 612 after being
downloaded from the
page).
NOTE: Firmware files for ISS have a .eff extension. Do not attempt to load any other
file types.
3. Double-click the firmware file name.
The Open window closes, and the
selected firmware file name appears in
the Update Firmware panel on the web
page.
4. Click UPDATE to begin (see figure 50). To
cancel the update, click the X button in
the Update Firmware panel.
During the updating process, a window
appears in the middle of the screen,
showing messages giving the progress of the update: Initializing, Installing the
Firmware, and Rebooting Device.
When the update is completed, the message window closes and the message
Firmware Upload Complete appears near the top of the screen. The new firmware
filename appears beside Version in the Firmware panel.
Data bits — 8
•
• Stop bits — 1
Serial port configuration
) displays the current firmware version and the date it was last
7
on page 60 to download the firmware files).
Extron web
ISS 608 and ISS 612 Seamless Switchers • Internal Web Page
on page 70) displays the RS-232
6
Figure 48. RS‑232 Panel
Software/Firmware
Figure 49. Firmware Panel
Figure 50. Firmware Update Dialog Box
74