Table of Contents
Advertisement
1)
Press as to select [COLOR MATCHING].
2)
Press qw to select [MEASURED].
3)
Press the <ENTER> button.
f The [MEASURED MODE] screen is displayed.
4)
Press as to select [MEASURED DATA].
5)
Press the <ENTER> button.
f The [MEASURED DATA] screen is displayed.
6)
Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.
7)
Press as to select a color, and press qw to adjust the setting.
f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
8)
Once all the input is completed, press the <MENU> button.
f The [MEASURED MODE] screen is displayed.
9)
Press as to select [TARGET DATA].
10) Press the <ENTER> button.
f The [TARGET DATA] screen is displayed.
11) Press as to select a color and press qw to input coordinates for desired colors.
f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
12) Once all the input is completed, press the <MENU> button.
Note
f Colors are not displayed properly when target data is a color outside the region of this projector.
f Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.
f When using a colorimeter or similar instrument to measure measurement data, measure the colors displayed with [AUTO TESTPATTERN].
f A difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instruments
and measurement environments used.
[COLOR CORRECTION]
Colors can be adjusted and registered for each input signal format.
1)
Press as to select [COLOR CORRECTION].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[USER]
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set as necessary for the screen
in use.
1)
Press as to select [SCREEN SETTING].
2)
Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
3)
Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
Model No.
PT-DZ870E
96 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Standard setting
For each of the following four signal formats: VIDEO, Y/C, RGB, and YC
green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button
to set the details. Adjustment is possible within the range of -31 - +31.
[SCREEN FORMAT]
[16:10]
[4:3]
[16:9]
Range when [SCREEN POSITION] is selected
Cannot be adjusted.
Adjusts the horizontal position between -160 and 160.
Adjusts the vertical position between -60 and 60.
C
/YP
P
, six colors of red,
B
R
B
R
Advertisement
Table of Contents
