Error Code Chart; Possible Error Indicators - Wolf E Series Technical & Service Manual

Possible Error Indicators

The last occurring error description will be shown in the text area of the Display board. Pressing the ENTER key will
cycle through the last occurring seven errors for the oven. The Single and Double Wall Oven stores a total of 20
errors. (See Figure 5-7, 5-8, 5-9, 5-10)
Convection Fan Icon Convection Fan Icon
Oven Cavity Icon - Oven Cavity Icon -
Single oven only has
one cavity indicator
{ DIPLAYed Phrase } { DIPLAYed Phrase }
NOTE: The LCD will show the Displayed Phrase given below and on next page, not the error code number.
NOTE: See Glossary at the begining of this section for an explanation of the acronyms in the displayed errors.
Priority Displayed Phrase
2 RTD Open
2 RTD Shorted
2 Temp Probe Short
3 No Inner Bake element detect
3 No Outer Bake element detect
3 No Broil element detect
3 No Lt Conv element detect
3 No Rt Conv element detect
3 No MDL detect
3 No Left Convect Fan detect
3 No Rt Convect Fan detect
3 No Cooling Fan detect
3 No Oven Light detect
2 Lock inputs invalid
2 Lock/Door inputs invalid for Clean
2 MDL run timeout
2 TCO detect as open
2 Brownout error
2 Inner Bake relay shorted
E E - - S S e e r r i i e e s s W W a a l l l l O O v v e e n n
E E - - S S e e r r i i e e s s W W a a l l l l O O v v e e n n
Timer Icon Timer Icon
__
{
Figure 5-7. Error Code History Display and Test Mode Icons

ERROR CODE CHART

Figure 5-8. Error Codes and Displayed Messages
External Components
Time Stamp of Error - Time Stamp of Error -
Refer to "Unit Operation
Time" under statistics to
determine when this
error occured
d H m
ys __ rs __ ns
indicate the door lock state:
(Upper/Lower) RTD failure (device or wiring)
(Upper/Lower) Meat Probe failure (device or wiring)
Check specified element & wiring
Check specified MDL & wiring
Check specified fan & wiring
Check specified oven light transformer & wiring
Check door motor assy & wiring
Check air flow, verify cooling fan operational
Check home wiring, voltages, replace Relay Module
Check connections, replace Relay Module of the oven indicated
5-9
Troubleshooting Guide
1= the most recent error
Arrows - Arrows -
Used in test mode to
Open ---
Service Instruction
Record Number -
1
--- Closed