Aux Page - Garmin GI 275 Pilot's Manual

Enabling/disabling an engine advisory:
1) From the 'Main' Page, open the page menu and select Options.
2) Select the desired Advisory Type Button.
3) Select the Enable Button to enable or disable the advisory. The advisory is enabled when
the annunciator bar is green.

AUX PAGE

Additional gauges which do not fit on the 'Main' Page and are not alerting gauges, display
on the 'AUX' Page (when the MFI is configured as an MFD or Standby ADI, this page may,
instead, be labeled 'AUX EIS' Page). Advisory Options may be accessed from the page menu
on this page as well. Up to four pilot-defined data buttons can be displayed on this page if
the space is not required for gauges based on the installation. Data options are determined by
configuration, and may include the following:
• CHT Differential
• Density Altitude
• Destination ETA
• Distance
• Endurance
• Estimated Fuel Remaining
• Estimated Time Enroute (ETE)
• Fuel at Destination
• Fuel Used
• Ground Speed
• Outside Air Temp
• Range
• TACH Time
190-02246-01 Rev. L
• Clock
• Destination Distance
• Destination ETE
• EGT Differential Temp
• Endurance at Destination
• Estimated Time of Arrival (ETA)
• Flight Time
• Fuel Efficiency
• GPS Altitude
• HOBBS Time
• Percent Power
• Range at Destination
• AUX Fuel
Garmin GI 275 Pilot's Guide
Engine Indication System
73