Garmin GI 275 Pilot's Manual page 138

Navigation
Adjusting the display of roads on the 'Map' Page:
1) From the 'Map' Page, open the menu and select Map Options > Land Options.
2) Select the Roads Button to enable/disable the display of roads.
3) Select the Road Options Button.
4) Select the button for each desired road type to enable/disable.
5) Select the corresponding Range Button for each desired road type. Then, select the
desired range setting.
Runway Extensions
Runway extensions are always displayed on the 'HSI Map' Page depending on map range and
detail level. Runway extensions may be displayed on the 'Map' Page at the pilot' s discretion,
by enabling/disabling and changing the range display settings. Runway Extensions, when
enabled, will be depicted under the following conditions:
» Flight plan information is displayed and the enroute waypoint after the active leg is an
airport.
» Flight plan information is displayed with an arrival or approach to the destination
airport.
» Direct-to navigation to an airport is active.
Enabling/disabling the display of runway extensions:
1) From the 'Map' Page, open the menu and select Map Options > Aviation Options.
2) Select the Runway EXT Button to enable/disable the display of runway extensions on
the map.
3) If necessary, select the Runway EXT RNG Button to display a list of range settings.
Select the desired range display setting.
116
'HSI Map' Page - Runway Extensions
Garmin GI 275 Pilot's Guide
Runway Extensions
190-02246-01 Rev. L