Garmin GI 275 Pilot's Manual page 133

Enabling/disabling the display of airways on the 'HSI Map' Page:
1) From the 'HSI Map' Page, open the menu and select HSI Map Options > Map Options
> Airways.
2) Select the Airways Button and select the Off, All, High, or Low Button to display the
desired airways.
Enabling/disabling the display of airways on the 'Map' Page:
1) From the 'Map' Page, open the menu and select Map Options > Aviation Options.
2) Select the Airways Button and select the All, High, or Low Button to display the
desired airways.
Or:
Select the Low Airways Button and the High Airways Button as necessary to enable/
disable the desired airways.
Selecting an airway range for the 'Map' Page:
1) From the 'Map' Page, open the menu and select Map Options > Aviation Options.
2) Select the Low Airways RNG Button. Then, select the button for the desired range
setting.
3) Select the High Airways RNG Button. Then, select the button for the desired range
setting.
A Z 'M
uto ooM on tHe
AutoZoom adjusts the range on the 'Map' Page when waypoint sequencing occurs for the
active flight plan. Control of the ranges at which the auto zoom occurs is done by setting the
minimum and maximum 'look forward' times. These settings determine the minimum and
maximum range to display based upon the aircraft' s ground speed.
Enabling/disabling AutoZoom on the 'Map' Page:
1) From the 'Map' Page, open the menu and select Map Options > Map Options.
2) Select the AutoZoom Button to enable/disable the function.
Setting the minimum and maximum range for AutoZoom:
1) From the 'Map' Page, open the menu and select Map Options > Map Options.
2) Select the AutoZoom Min Button. Then, select the button for the desired minimum
range setting.
3) Select the AutoZoom Max Button. Then, select the button for the desired maximum
range setting.
190-02246-01 Rev. L
' p
Ap Age
Garmin GI 275 Pilot's Guide
Navigation
111