Vfr; Selecting A Squawk Code - Garmin GI 275 Pilot's Manual

Additional Features

VFR

Touch the VFR key to set the VFR squawk code (1200).
Touch to Set VFR Squawk Code

SELECTING A SQUAWK CODE

The selected squawk code will always be in use. As you change a squawk code, the original
code will be used until you are finished selecting the new code.
Squawk Code
1) Touch the transponder squawk code window at the top of the display.
2) The XPDR page will be displayed. The Squawk Code value will be active for selection for
use by the active transponder.
Touch to Change
Squawk Code
Standby
Transponder
ADI - Transponder Control Display - Change Squawk Code
266
VFR Squawk Code
1200
7500
7600
7700
Special Transponder Squawk Codes
Garmin GI 275 Pilot's Guide
Description
Default VFR Code in U.S.A.
Hijacking
Loss of Communications
Emergency
190-02246-01 Rev. L
Active
Transponder
Selection