BMW iX Owner's Manual page 286

CONTROLS
▷ Fold down the cargo area floor before
driving off.
▷ Always secure cargo against slipping,
using straps, belts and lashing eyes, for
instance.
Opening the storage compartment
Fold the cargo area floor folded forward up to
the latching point.
When the cargo area floor is folded further up-
ward, it will be released from the holders.
Additional information:
Insert cargo area floor, refer to page 286.
Closing the storage compartment
Push the cargo floor panel downward.
286
Cargo area
Online Edition for Part no. 01405A6B2E9 - X/22
Removing the cargo floor panel
1. Fold the rear part of the cargo floor panel
forward.
2. Slightly raise the cargo area floor.
3. Pull the cargo area floor back and out of the
brackets and remove.
Inserting the cargo floor panel
Proceed in reverse order to insert the cargo
area floor:
1. Position the folded cargo area floor flat at
the mounts.
2. Push the cargo area floor forward into the
mounts. The cargo area floor engages no-
ticeably.
Enlarging the cargo area
Principle
The cargo area can be enlarged by folding
down the rear seat backrests.
General information
The rear seat backrest is divided at a ratio of
40–20–40. The side rear seat backrests and
the center section can be folded down sepa-
rately.
The rear seat backrests can be folded down
from the rear or from the cargo area.