BMW iX Owner's Manual page 180

CONTROLS
Detection range
The following situations may not be detected,
for instance:
▷ Vehicle driving slowly in front and being ap-
proached at high speed.
▷ Vehicles that suddenly swerve in front of
you, or strongly decelerating vehicles.
▷ Vehicles with unusual rear designs.
▷ Two-wheeled vehicles ahead of you.
▷ Partially covered pedestrians or bikes.
▷ Pedestrians that are not detected as such
because of their contour or posture.
▷ Pedestrians with insufficient height.
Exit warning
Principle
The exit warning helps to avoid accidents.
The system can warn the occupants when
they are opening the doors and a risk of colli-
sion with approaching objects is detected.
General information
Two radar sensors in the rear bumper monitor
the area behind the vehicle.
Depending on the vehicle equipment, the area
around the vehicle in front of the vehicle is
monitored as well. Two additional radar sen-
sors are located in the front bumpers.
The system monitors the vehicle's surround-
ings for a limited time after you get in or park.
180
Safety
Online Edition for Part no. 01405A6B2E9 - X/22
A possible risk of collision is indicated by vari-
ous warning functions.
Safety information
Follow the safety information in the "Forward
Collision Mitigation" chapter.
Sensors
The system is controlled by the following sen-
sors:
▷ Radar sensors, side, rear.
▷ Depending on the equipment: radar sen-
sors, side, front.
Turning the exit warning on/off
Turning on the system automatically
The exit warning activates automatically after
departure if the function was switched on at
the completion of the last trip.
Turning the system on/off manually
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Exit warning"
7. "Off"
Adjusting the exit warning
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Exit warning"
7. Select the desired setting.