BMW iX Owner's Manual page 221

Functional requirements
▷ The functional requirements for Assisted
Driving are met.
Assisted Driving, refer to page 217.
▷ Driving on a road without pedestrians or cy-
clists and with physical barriers to oncom-
ing traffic, such as crash barriers.
▷ A vehicle has been detected at a sufficient
distance behind your own vehicle since be-
ginning the drive.
▷ Lane boundaries are detected.
▷ Maximum speed approx.
110 mph/180 km/h.
▷ The minimum speed is country-specific.
Turning on/turning off Automatic
Lane Change Assistant
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Assisted Driving"
7. "Automatic Lane Change"
Changing lanes
1. Ensure that the traffic situation permits
changing lanes.
2. Press the turn signal lever in the required
direction to the pressure point for signaling
briefly.
Driver assistance systems
Online Edition for Part no. 01405A6B2E9 - X/22
Supporting steering movement in the desired
direction can be felt a short time later.
After the lane change, the system helps keep
the vehicle in the new lane.
Canceling a lane change
The lane change can be canceled by steering
movement into the opposite direction or by op-
erating the turn signal in the opposite direction.
Displays in the instrument cluster
Icon Description
Steering wheel icon and lane change
arrow icon are green:
The system carries out a lane
change.
Steering wheel icon is green and line
for lane marking on respective side is
gray:
The system detected the lane change
request. Lane change not currently
possible.
Depending on the equipment and national-
market version, information for the system is
displayed in the Assisted View in the central
display area of the instrument cluster.
Additional information:
Assisted View, refer to page 151.
System limits
The limits of the Assisted Driving system ap-
ply.
Additional information:
Assisted Driving, refer to page 217.
CONTROLS
221