BMW iX Owner's Manual page 263

Setting the temperature
The temperature can be set individually for
driver and front passenger in the air condition-
ing bar.
Set the desired temperature:
▷ Raise the temperature.
▷ Lower temperature.
Configuring the temperature
adjustment
When the automatic program is switched on,
the heating and cooling speed can be adjusted
as follows:
▷ "BALANCED".
This setting enables a smooth, low-noise
adjustment of the interior temperature.
▷ "DYNAMIC".
The setting enables a quick adjustment of
the interior temperature with a high air vol-
ume.
Setting the rear automatic climate
control temperature
Via iDrive
1. "CLIMATE MENU"
2. "Settings"
3. "Second row of seats"
4. Set the desired temperature.
Online Edition for Part no. 01405A6B2E9 - X/22
Climate control
Using the button
Press the upper or lower button side to
set the desired temperature.
Footwell temperature
General information
The air temperature in the footwell can be ad-
justed.
This does not change the set interior tempera-
ture for the driver and front passenger.
Adjusting the footwell temperature
1. "CLIMATE MENU"
2. "Settings"
3. "Driver" or "Front passenger"
4. "Temperature adjustment for footwell"
5. Increase or decrease temperature.
Air conditioning
Principle
The air in the interior will be cooled and dehu-
midified and, depending on the temperature
setting, warmed again.
Functional requirement
Standby or drive readiness is switched on.
Switching the cooling function on/off
1. "CLIMATE MENU"
2. "A/C"
3. Select the desired setting.
Depending on the weather, the windshield and
the side windows may fog up briefly when
drive-ready state is switched on.
When using the cooling mode, condensation
that will exit below the vehicle.
CONTROLS
263