BMW iX Owner's Manual page 252

CONTROLS
▷ Greatly deviating conditions when storing
and driving the distance covered, for in-
stance other tires or changed ambient con-
ditions like light conditions or weather.
▷ Delayed display of overlapping stored ma-
neuvers when driving into the activation
area.
▷ In multi-story parking garages, for record-
ings at different parking levels, or for re-
cordings that run over several parking lev-
els.
Remote control
Principle
With remote control, the vehicle can be driven
remotely when parking and maneuvering using
the Memory Parking and Automatic Parking
Assistant Professional.
The maneuver is performed independently,
outside the vehicle, using a smartphone. This
makes it easy to get in and out of the vehicle.
You can continue a maneuvering operation
that has already begun at any time with re-
mote control.
Vehicle features and options
This system may not be available in the
owned vehicle, e.g. due to the selected op-
tional equipment, the national-market version
or the option for later enabling and software
updates. This also applies to individual func-
tions of the system.
For information on whether a function is cur-
rently available in the vehicle or when the func-
tion can be installed in the vehicle, contact
an authorized service center or other qualified
service center.
Additional information:
Vehicle equipment, refer to page 8.
252
Parking
Online Edition for Part no. 01405A6B2E9 - X/22
General information
Note the information in the Automatic Parking
Assistant and Memory Parking chapter.
Protect the smartphone against unauthorized
use.
The low-beam headlights are switched on for
the duration of the maneuver.
Functional requirements
▷ All occupants have left the vehicle.
▷ Doors and cargo area are closed.
▷ The smartphone is compatible with remote
control.
▷ The BMW app must be installed on a com-
patible smartphone.
▷ The BMW app must be linked to a Connect-
edDrive account.
▷ Bluetooth must be enabled on the smart-
phone.
▷ The distance between vehicle and smart-
phone is no greater than approx. 19 ft/6 m.
▷ A valid digital key must be set up for the
vehicle.
Additional information:
BMW Digital Key, refer to page 88.
Performing a parking operation with
remote control
1. Engage selector lever position P.
2. Leave the vehicle and close the doors and
trunk.
3. Open remote control in the BMW app and
maneuver forward or backward, or select
the desired parking method.
4. Follow the instructions on the smartphone.
Stop the vehicle manually if obstacles are
present.
When you have finished parking, engage
selector lever position P and switch off drive
readiness.