BMW iX Owner's Manual page 218

CONTROLS
Radar sensors, side, front.
▷ Depending on the equipment:
Radar sensors, side, rear.
Additional information:
Sensors of the vehicle, refer to page 37.
Functional requirements
▷ Depending on the equipment: speed below
130 mph/210 km/h or 110 mph/180 km/h.
▷ Sufficient lane width.
▷ Hands on the steering wheel rim.
▷ Sufficiently wide curve radius.
▷ Drive in the center of the lane.
▷ Turn signals are switched off.
▷ The sensor system calibration process is
complete.
▷ Distance control is active.
▷ Seat belt on the driver's side fastened.
▷ Forward Collision Mitigation is active.
▷ Depending on the equipment:
Side-collision warning is active.
Turn on Assisted Driving
1. If necessary, press the button.
2. If necessary, press the button re-
peatedly until Assisted Driving is selected.
Steering wheel icon lights up gray.
The system is on standby and does not
manipulate steering movements.
System activates automatically as soon as all
function conditions are fulfilled.
Steering wheel icon lights up green.
The system is active.
When the system is switched on, the Forward
Collision Mitigation and, depending on the
218
Driver assistance systems
Online Edition for Part no. 01405A6B2E9 - X/22
equipment, the side-collision warning are ac-
tive.
Interruption Assisted Driving
automatically
The system interrupts the supporting steering
movements automatically, for example in the
following situations:
▷ Depending on the equipment: at a
speed above 130 mph/210 km/h or
110 mph/180 km/h.
▷ After releasing the steering wheel.
▷ With strong steering intervention.
▷ When leaving own lane.
▷ When the turn signal is switched on.
▷ When the lane is too narrow.
▷ If a lane boundary is not detected and there
is no vehicle driving in front.
▷ The Cruise Control with distance control is
interrupted.
▷ The seat belt on the driver's side is unfas-
tened.
Steering wheel icon lights up gray.
The system is on standby and does not
manipulate steering movements.
System activates automatically as soon as all
function conditions are fulfilled.
Displays in the instrument cluster
Icon Description
Gray steering wheel icon:
The system is on standby.
Green steering wheel icon:
The system is activated.
The system supports the driver in
keeping the vehicle within the lane.