BMW iX Owner's Manual page 236

CONTROLS
Display
Yellow lines on the screen display identify the
bumpers of your own vehicle.
Depending on the engaged selector lever posi-
tion, the camera view of the rearview camera
or front camera will be displayed.
Activation points
Principle
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
General information
Up to ten activation points can be stored.
Activation points can be used when driving for-
wards.
Follow instructions in the Parking assistance
systems chapter.
Functional requirements
▷ A GPS signal must be received.
▷ A BMW ID or driver profile must be ena-
bled.
▷ The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
236
Parking
Online Edition for Part no. 01405A6B2E9 - X/22
Storing activation points
1. Drive the vehicle to the position where the
system should switch on and stop.
2. Press the button.
3. "Panorama view"
4. "Activation point"
The current position is displayed.
5. "Save activation point"
Activation points are saved with the following
information, for example:
▷ With the city/town.
▷ With the city/town and the street.
▷ With the GPS coordinates.
You can rename the location and street infor-
mation created automatically.
Using activation points
The use of activation points can be switched
on and off.
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
6. "GPS-based"
Editing activation points
You can rename or delete specific activation
points or all of them.
1. Press the button.
2. "Panorama view"
3. "Manage points"
A list of all saved activation points is dis-
played.
4. Select the desired setting.