BMW iX Owner's Manual page 133

Turning off the window wiper
system and flick wipe
Press the lever down or forward.
▷ Turning off: press the lever down, arrow 1,
until it reaches the 0 position.
▷ Flick wipe: press the lever down from the
0 position, arrow 1, and press the lever in
position 0 or position 1 forward, arrow 2.
The lever automatically returns to its 0 po-
sition when released.
Rain sensor
Principle
The rain sensor automatically controls the
wiper operation depending on the intensity of
the rainfall.
General information
The sensor is located on the windshield, di-
rectly in front of the interior mirror.
Safety information
NOTICE
If the rain sensor is activated, the wipers
can accidentally start moving in car washes.
There is a risk of damage to property. Deacti-
vate the rain sensor in car washes.
Online Edition for Part no. 01405A6B2E9 - X/22
Driving
Activating rain sensor
Press lever up once from the 0 position, ar-
row 1.
Wiping operation is started.
The LED in the wiper lever is illuminated.
In frosty conditions, wiping operation may not
start.
Deactivating rain sensor
Press lever back into the 0 position.
Adjusting the rain sensor sensitivity
Turn the thumbwheel to adjust the sensitivity
of the rain sensor.
▷ Upward: high rain sensor sensitivity.
▷ Downward: low rain sensor sensitivity.
CONTROLS
133