BMW iX Owner's Manual page 123

3. Press the selector lever to position N.
An appropriate Check Control message is
displayed.
Position N is indicated on the selector lever.
4. Maneuver the vehicle from the hazardous
area and secure it against rolling away.
Turning off drive-ready state
Park the vehicle. Noises from the electrical sys-
tem such as for cooling the high-voltage sys-
tem might still be audible.
After stopping the vehicle:
1. Apply brake and engage the parking brake.
2. Press the Start/Stop button.
The READY indicator goes out and a signal
tone sounds.
If leaving the vehicle stationary for longer pe-
riods, follow the instructions in the Mobility
chapter.
Additional information:
Service life of the high-voltage battery, long
stationary periods, and taking the vehicle out
of service, refer to page 312.
Driving in detail: eDRIVE
Safety information
DANGER
The braking effect of the electric motor can
be stronger than for a vehicle with combus-
tion engine. Abrupt braking and slow-down
may confuse other road users. There is a
risk of accident. Carefully release the acceler-
ator pedal. Adjust driving style to traffic con-
ditions. Watch surrounding traffic closely and
actively intervene where appropriate.
Online Edition for Part no. 01405A6B2E9 - X/22
Driving
Warning
When driving in electric mode, pedestrians
and other road users might pay less attention
to the vehicle due to the lack of engine noise.
There is a risk of accident. Adjust driving style
to traffic conditions. Watch surrounding traffic
closely and actively intervene where appro-
priate.
Warning
Without energy recovery, the braking effect of
the electric motor is unavailable. The vehicle
could roll further than anticipated. There is a
risk of accident. Adjust driving style to traffic
conditions. Watch surrounding traffic closely
and actively intervene where appropriate.
Accelerator pedal positions,
displays
1 Deceleration and energy recovery,
CHARGE
2 Rolling
3 Acceleration or constant speed: ePOWER
CONTROLS
123